2

How To Align A Satellite Dish – 3 Easy Steps

How To Align A Satellite Dish - 3 Easy Steps

Align A Satellite Dish In Few Steps

If you are looking for how to align a satellite dish, then read on. By the time you have finished reading this article, you will know how to align a satellite dish.

We live in an age where information is fast and free with the development of digital technology. This is why internet marketing has become so popular, and most businesses use internet marketing as their main strategy. But if you don’t have the correct tools, your business will never grow.

Satellite dishes are often misaligned for several reasons. It can be because of the lack of knowledge about aligning a satellite dish. These two factors have come together for two reasons: a lack of experience and a wrong set up.

The first thing you need to know about how to align a satellite dish is the proper use of the right tools. If you do not use the right equipment, then you will not get the right results from your satellite.

Tools To Align A Satellite Dish - 3 Easy Steps

Requirements Tools To Align Your Satellite Dish

  • Visit Lyngsat to get details of the satellite and the dish size
  • A dishpointer to analyze the satellite angles or degree
  • A Satellite Finder or TV Spectrum Analyzer used for monitoring the signal strength and quality

Useful Tips For Aligning Your Satellite Dish

Using Neighbor’s satellite dish as reference will safe your time and energy for picking the right place to point your dish. Though it is not recommend to rely on it because the satellite angle may be differ.

Avoid Trees, Mast and building structures in the line sight of satellite dish. These will prevent you to get reliable signal most especially trees. If trees branches is short today, in few month or years, it will eventually growing up and block the signal.

Things You should look for when it comes to how to align a satellite dish – Adjustment And Skew LNB

Keep in mind that you may need to consult with an expert, to make sure you are following the correct procedures. Also, the technician you ask will know which equipment will work best for your specific needs. I had published an article regarding how to pick the right KU LNB.

In addition to the basics, you should know that ‘stacking’ is a way of adjusting the LNB (LNB is short for ‘low gain band’) settings for your satellite dish. You can ‘stack’ the LNB settings by turning off the reception of your satellite dishes signals, to reduce interference with other satellites.

Your LNB (low gain band) setting should be adjusted according to the orbit of your satellites, to get the best signals. You may need to adjust the LNB settings of your satellite dish, to get the correct view to ensure you have the proper alignment of your dish.

How To Align A Satellite Dish - 3 Easy Steps

Simple way to align your satellite dish Step-By Step

You don’t have to pay for your technician to do it for you. I am sure that you will agree that when you start to compare prices on the internet. These price comparisons can help you get the best deal on your next satellite dish system.

You need to start by using your LNB tuning knob, to adjust the LNB to the east or west side of the satellite dish. Do not worry about how to adjust azimuth (East and West side) as you are not adjusting that setting; it is only used to get your signal to the LNB receiver properly.

Next, you need to tilt the satellite dish by tilting the knob to the appropriate side. Do not worry about how to align a satellite dish. The tilt setting is only used to tilt the satellite dish to the proper side of the dish. When you tilt the satellite dish, it will eliminate any interference with the north and south satellites. And will allow your LNB receiver to receive better signals.

Then you need to adjust the RASP (radio acoustics programs) settings on your satellite dish, so that it receives all frequencies evenly. You should notice a difference in your LNB receiver when you adjust this setting.

Lastly, you need to adjust the elevation adjustment or the skew setting on your satellite dish. As you can see, how to align a satellite dish is not hard.

3

How To Fix Satellite Dish Signal When It Says No Signal?

Adjust Or Re-align Satellite Dish

Hi guys, Today I’m gonna teach you how to fix satellite dish signal when it says no signal, Some time you may be experience little freezing in pictures or no or bad signal. You can also do it by yourself which can save you some money to pay for satellite tv installer or technician. Believe me, irrespective satellite tv package you are using whether it is DirecTV Or Dish Network Or DStv. The following guidelines needs to be adopted on how to fix satellite dish signal when you experiencing no signal.

Troubleshooting of Satellite Receiver & Cable

Whenever you lost signal or experiencing no signal on your satellite dish, The first that come to your mind is to verify from your neighbor if that particular channels doesn’t OFF temporarily as a result of technical maintenance upgrade. As usually happened to TStv.

Secondly, You can also check coaxial cable if it still intact. You have to trace the cable from dish to the receiver ensures that there’s no breakage. Also check the F-connector hold the coaxial cable together at both end.

In rare cases, Lightening and thunder can also cause lost of signal or weak signal. After the lightening, thunder always accompany it, So if you experiencing lost of signal or no signal on some channels while others are sill working then the decoder or receiver might develop tuner fault or LNB itself. To fix satellite dish signal you have ensure that the coaxial and F-connector were tightly connected. Always Power Off when there’s raining and it may also needs to reboot or do factory reset to work properly. some rules are available for american for installing Consumer-owned antennas and satellites dishes.

Adjust Or Re-align Satellite Dish

How To Fix Satellite Dish Signal: Adjust Or Re-align Satellite Dish

After you have troubleshoot your receiver, Then your satellite dish may need to adjust or re-align, simply because the base and elevation might be shift. To fix satellite dish signal in this situation, You have to get some equipment or tools ready before climb the ladder.

Requirement Tools or Equipment

  • `A ladder with adequate height to reach satellite dish
  • Crescent wrench of different size depending on the size of the satellite dish
  • A compass
  • A digital receiver or decoder
  • Television
  • Signal meter or signal finder

If you experiencing No signal, Weak signal or searching for signal message appeared on your TV Screen. I would suggest you to remove the power cord from either Dish Network or DirecTV Network or DStv receiver for few seconds. If the message still appear on your TV Screen or signal problem still persists. Then you needs to re-align or adjust your satellite dish by adjusting the elevation and azimuth settings.

SEE ALSO:

How To Adjust or Re-align A Satellite Dish Signal

To fix satellite dish signal by adjusting or re-align dish, You need to use signal meter to monitoring the signal and here are steps on how to use signal meter or satfinder:

  • Press Menu
  • Select Installation and press ok
  • Choose the appropriates satellite
  • Enter the transponder/frequency or choose the right transponder from the list

There are stages involves in aligning or adjust your dish which as follows:

  • Check the mast and make sure it is level
  • Adjust the azimuth or rotational of the satellite dish
  • Adjust the elevation of the satellite dish

Precautions And Tips

  • Ensures that the dish is well placed on the level surface to prevent failing.
  • Ensures that the dish is hold firmly to avoid damage to your finger and body as whole.
  • Gently remove the dish if needed and gently re-mount without causing harm to the satellite dish.
  • Tighten the sleeve nuts both on elevation and azimuth, but still movable for easy installation.
How To Fix Satellite Dish Signal When It Says No Signal?

How To Adjust The Elevation And Azimuth Of The Satellite Dish

To help the layman, Elevation refers to as the movement of the vertically(up and down) towards a particular satellite angle degree. To fix or adjust the elevation or Inclination of your satellite dish, you need to do the following:

  • Use compass to determine the East and West position.
  • Mount the dish to a place where it is totally free from obstructions and ensures that it levels with the ground perpendicular to 90 degree.
  • Loosen the elevation bolts and sleeve nuts a tittle bit but not totally and make sure that the dish is still movable.
  • Start moving your dish up and down/left to right slowly while watching the signal finder to point out the signal point until highest signal is achieved.
  • Tighten the elevation bolts and sleeve nuts completely to avoid loss of signal.
LNB Adjustement Or Placement

LNB Adjustement Or Placement

LNB placement can also cause lost of signal simply because the focal length is not accurate. Sometime due to transponder switches (change from one frequency to another) you would need to adjust the LNB either twist from up or down. The issue of focal length usually occur in wide band dish you can learn how to calculate focal length. Later you realized that the LNB is completely damage, I will recommend to change the LNB with low noise figure 0.2db. Even if you have never try to install satellite dish by yourself you can start today with this tutorials.

If you find this post informative don’t forget to share with your friends and family or share across social media. If you have any suggestions for us don’t forget to contact us.